So, you have performed Netgear router setup. But, what’s that? Is your Netgear Nighthawk router not connecting to the internet? Well, you might be facing this issue due to a number of reasons; loose Ethernet connection, an improper connection between WiFi devices, outdated firmware, WiFi interference, an issue from the end of your Internet Service Provider, etc.
No matter what the reason is behind the ‘Netgear router not connecting to the internet’ issue, the tips mentioned in this article will surely help you troubleshoot it. So, wait no more, and read on.
Resolved: Netgear Router Not Connecting to Internet
- Reboot Your Router
Before you take the help of any other troubleshooting step, reboot your Netgear Nighthawk router. To get the job done, disconnect all the WiFi-enabled devices connected to your router, unplug it from the wall socket, wait for some time, and plug it back into the wall outlet.
If even after rebooting your WiFi device, you’re experiencing the ‘router not connecting to the internet’ issue, then move to the next hack.
- Bring Your WiFi Devices Closer
Chances are that your Netgear WiFi router is placed far away from the modem due to which it is not able to connect to the internet. Therefore, make sure that both your devices are placed in close proximity. But, not too close. Otherwise, their WiFi signals might clash and result in various other technical issues.
Now, try to access the Nighthawk router login page, and check whether the internet issue is fixed or not. If not, then keep reading.
- Check the Ethernet Connection
In case the Ethernet cable connecting your Netgear Nighthawk router and the existing modem is worn-out or damaged, that too can lead you to the issue that you’re currently facing. Thus, make sure that the cable via which your devices are connected is free of damages. If you feel that the cable needs to get replaced, then don’t think twice before changing your thoughts into action.
- Update the Firmware
Outdated firmware can also force you to come across the ‘Nighthawk router not connecting to the internet issue. To get the issue fixed, it is recommended that you update the firmware of your WiFi device. If you don’t know how to perform a Netgear router firmware update, then refer to the guidelines mentioned in the user manual.
Once you are done updating your device, try to access the router login page. Are you not able to? Looks like you still need our help!
- Get in Touch with Your ISP
There is a possibility that the internet issue isn’t because of something that you did. It might be from the end of your Internet Service Provider (ISP). To confirm the same, get in touch with him. If he agrees that the internet problem is from his side, then give him some time to fix it.
- Perform Factory Default Reset
If you are reading this point, then it means that you’re still struggling with the ‘Netgear router not connecting to the internet’ issue. But, fret not! Performing factory default reset might resolve the issue for you.
Here are the steps that you need to go through to reset your Netgear Nighthawk router:
- Look for the Reset button located at the bottom of your WiFi device.
- Once found, take an oil pin, and carefully press the button using it.
- Now, give your device some time to get thoroughly restored to the default mode.
As soon as you finish resetting your home router, reconfigure it by accessing 192.168.1.1 default router IP.
The Bottom Line
That’s all! With this, our post to troubleshoot the ‘Netgear router not connecting to the internet issue has come to an end. Let’s hope that the tips mentioned above were able to assist you in resolving the issue.